Monday, 22 September 2014

How to assemble MiniSys T8 fanless, passively cooled HTPC - Tutorial

Today I'm gonna  show, how to assembly fanless, passively cooled  HTPC system based on MiniSys T8 case.
MiniSys T8 it's a new product of Chinese "Iwill" company  who specialize in aluminum  PC chassis.
This chassis is sold with short manual/assembly leaflet, but I've decided to make this tutorial to help "desperatos" who are desperate to build a completely silent HTPC, and wish to use this particular Iwill housing, as manual assembly leaflet  in  not  very detailed and  assemble  by less experienced   DIY may not be easy.....

Step 1: disassemble T8 chassis.
It is quite  easy,  please unscrew top  four  screws located on the corners of the top lid.
then  please do the same with the bottom screws -  they are located inside of the   anti-vibration legs. Please do this  gently as that's the only screws that keeps chassis  parts together. After disassembling, case will looks like  on the photo below:



Step 2: Install the hard drive(s) on the bottom plate of the chassis. MiniSys T8 HTPC case can  accommodate  2 x 2.5 inch Hard/SSD drives. On the photo below  you can find  a spaces designated for HDD/SSD installation:



Simply, apply Hard drive  to the space on the bottom lid designated for  HDD and then use a black short screws attached  in the package, to screw in the  hard drive  from the underneath of the bottom lid. If T8 120W DC power used, please screw in this board as well in a designated space. 






Please Note!
 SATA sockets of the hard drive(s) should be directed towards front panel of the  case.


Please  plug in your SATA  cables to the hard drive as on the photo below:



Step 3: Motherboard, CPU & RAM   installation.
Please  install CPU in your motherboard's socket, also RAM  modules in memory banks.
Before you will  screw your motherboard  in to the bottom lid of the case  please install  bottom  part of T8 case cooling system  as on the photos below:






Please note!
    This tutorial was prepared  without using a thermal compound/paste. It is essential to use such a thermal paste when installing cooling heat pipe system, otherwise  it may lead to  overheating your  motherboard & CPU, which may cause damage of your PC components. 

Step 4: Front, rear panel and side radiators installation.

To install rear panel  please insert metal I/O shield provided with your motherboard, into space on rear panel, designated for such a shield. Then please  screw in all  aluminum corner pillars, except one of two rear pillars.Then please place rear panel sheet  into  rear corner pillar already  installed, like on the photo below:


Then please insert another pillar(not yet installed), to his designated position in the chassis, making sure that another side of rear panel sheet is also  hidden in pillar's cavity:

Then, please  use remaining  anti-vibration pad, and screw in the last pillar to the bottom case lid:


After rear panel installation, your case's bottom lid should looks like that:

Now we can   mount side radiators, which is really an easy job.
Just slide in each radiator from the top of the case, as  shown on the photos:



Please do the same with a front panel:



Step 5: Cooling system installation.



T8 case cooling system  contain: cooling CPU core with  bottom  installation socket mount, 4 x 6mm diameter copper heat pipes & 2 x aluminum  side cooling  pads.

Please put all 4 heat-pipes on the bottom part of  CPU cooling radiator as ahown on the photo:

Then please screw in a top lid of the CPU radiator, but please leave some loose, so heat-pipes can be moved left or right:


Now, it's time to  apply side aluminum pads. Simply screw in one side pad to each side radiator like on the photo:



Step 6: Cables connecting & front panel  installation.

This step it's quite easy,  please connect  a front panel  connectors to the motherboard, and also hard drive(s)  SATA cables, and DC 12V  plug to the rear panel.  



Step 7: Optical drive installation.
Please skip this part if you're using  T8 case model without optical drive  slot, otherwise....

MiniSys T8 case coming with designated space for optical drive. Please note that   this case to not  support EJECT button. Only slot load-in optical drives can be used in this case type. 
    Firstly, we have to  install your optical drive inside of optical drive mounting holder  provided together with the case:




When  drive is mounted inside of  ODD holder, we have to  install it in the case:

And of course connect SATA cables to the motherboard.

Step 8: Top lid  installation.

Ok, all parts are  mounted inside of the case. It's time to close everything up.
Please  put a top lid of the case  on it's designated place, and use black  short screws to screw it in:


And job done!



Voila!




BR

Tomas

Friday, 19 September 2014

How to configure Audinst HUD-mini Hi-Fi USB Audio DAC in Ubuntu Linux - Tutorial


Today I'm going to show how to run Audinst HUD-mini Hi-Fi USB Audio DAC  in Ubuntu Linux distribution. Officialy this model is not supported in Linux distributions - this is an official AUDINST company statement.
But  this is not necessary the true. As this is an USB audio device it will use standard Linux snd_usb_audio module, but for unknown reason at this particular DAC   a default  audio PCM device hw:0 do not work in Linux. A whole idea is to force your Linux distribution to use hw:1 PCM device of your  HUD-mini  DAC  instead of hw:0.
So let's do this!

Please note that you will perform all changes in your syystem on your own risk , that's why it is wise to backup  all original files  before start edit them....

First thing to do, we  have to find out  information about our audio devices.
We can do it by typing aplay -l command in terminal, we should receive something like that as result:


user@user-desktop:~$ aplay -l

**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 1: ALC662 rev1 Digital [ALC662 rev1 Digital]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: HUDmini [Audinst HUD-mini], device 0: USB Audio [USB Audio]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: HUDmini [Audinst HUD-mini], device 1: USB Audio [USB Audio #1]
  Subdevices: 1/1

  Subdevice #0: subdevice #0



card 0 it's a default card in our  Ubuntu - usually that's integrated onboard audio card

device 0 is a default PCM device used by our Linux OS
card 1 it's our USB Audinst HUD-mini DAC device
device 0 it's a default PCM device  of our HUD-mini DAC - this device doesn't work in Linux
device 1 - this is an PCM  device that we will force  to work as default one  in our Ubuntu OS.


Please note!
If there's more(or less) audio devices your  PC, Audinst HUD-mini  DAC card number will change, so please read carefully  all information from aplay -l command, and update  card number  in  asound.conf and .asoundrc files if needed.



Secondly, we need to edit asound.conf file which is located in /etc directory:

Please write in terminal:
sudo gedit /etc/asound.conf
Please  remove all content from this file and then paste:

defaults.pcm.!card 1
defaults.ctl.!card 1
defaults.pcm.!device 1
defaults.ctl.!device 1 

and save the file.

Next step, we need to create  .asoundrc file in our  home directory and edit it:

pcm.!default {
  type plug;
  slave.pcm "plughw:CARD=HUDmini,DEV=1";
}

then save the file.
Ubuntu  distribution do not  contain .asoundrc file  as default, but some Linux distributions will have this file already in home directory. In that case please remove whole content of this file  and paste     content  above...

The last thing to  do is to change  default device  in Sound Preferences from your onboard sound card to Audinst HUD-mini DAC  device:




And voila!

All should work  fine right now.
I have tested  this solution on Ubuntu 10.04 and 12.04  distro, in  both systems HUD-mini DAC works fine.
But please  note that I can't guarantee that this solution will work in all Linux distributions. 
But it's really worth to try  if you a music enthusiast.....HUD-mini produce really  high  quality  sound!


BR

Tomas

Monday, 14 July 2014

MiniSys HT80 Compact mini-ITX HTPC Chassis

Today I've decided to  quickly review another interesting HTPC chassis - MiniSys HT80 HTPC case.

It's  manufactured by Chinese Iwill Technology Ltd company. Iwill is a well known manufacturer of OEM mini ITX, HTPC and car PC cases, they also released on the market their own brand called  MiniSys.

    Most popular MiniSys PC case models are: S197-H80, HT60 and  of course HT80.




First look  on the case gives very positive feelings. It's  a really eye catching little aluminum HTPC case, capable to accommodate regular  mini-ITX motherboard.

I have to admit that original MiniSys HT80 case dedicated for a Chinese market looks a bit different, we asked manufacturer  to change from cheap plastic power button of this case to the aluminum one(with one little Power LED light).
As mentioned above case is made of  brushed 3.0mm aluminum with wiredrawing technology (top lid is made of 2.0mm aluminum). Inside  you will find a optical drive/HDD bracket for one 2.5/3.5 inch HDD, but please be careful if planning using 3.5 inch HDD, it will be limited space inside, so regular motherboard with cooler  cannot be used. Only low profile HTPC motherboard/CPU bundles  such as Giada MI-HM70T-C1037U, or similar, will fit in, whe n 3.5" HDD used.....



However for tests we used regular Sandy/Ivy Bridge Giada MI-H61C motherboard
with i3-2100 CPU and PCCooler S85 CPU cooler which  is perfect for this application as it has 27mm of height only!

In such a  small cases, usually  there is a problem with overheating as hot air from CPU/chipset has no space inside to spread, it must be quickly dissipated from the case. In original "Chinese" version of the case there was a very loud 50mm fan installed. We decided to order this case without 50mm fan, we did some research and bought a good quality 50mm fan which keeps inside of the case cool and also keep noise on a reasonable level.
       When choosing an optical drive, please remember to choose slot-in loaded DVD/Bluray drive with EJECT button on left hand side, right hand side EJECT button drives are not supported in this housing!
     On the front panel 2 x USB2.0 ports can be found(can be upgraded to USB 3.0 on request), same as Audio OUT/MIC sockets.
      As standard, this case come without power kit,  DC power board/Pico PSU  and AC-DC brick adapter must be bought separately. For tests we've used  120W e-Mini DC 12V power board with 120W 12V e-Mini AC/DC adapter , which is more than enough  to power up Intel i3-2100 CPU, motherboard, HDD and DVD drive.



      Excellent advantage for the case is IR round window (located just next to power button), dedicated for remote controller's internal Infra Red receiver module. We've tested this case with  original  MiniSys  Remote controller, which support power ON/OFF function. Enthusiasts of XBMC/MCE  multimedia  systems will be delighted as  this R/C  model is well supported in MCE/XBMC environment.
I have to say, Iwill manufacturer did a very good job - they pay attention to details! Case  is made well,  surface has no dents or scratech, surprisingly, optical drive front slot has anti-scratch fabric layer which prevent disks from scratching - this feature is really rare, even in top quality cases. 
     When look on the rear panel, not to mention external SATA socket & Molex 4pin  power socket. It's a very useful thing, if additional external HDD or DVD drive must be plugged in quickly. Also 2 x rear COM port spaces may be useful for some "industrial" users.

     Whole case stands on silver "HI-Fi " style feet with anti-vibration layer, it gives to the chassis a noble and respectable look.

Case coming in a plain, hard carton box, additionally  protected by special styrofoam.  
Some technical details below:


Specification

ModelminiSys HT80
Material3.0mm Aluminum
Dimension204(D)x240(W)x80(H)mm
ColorBlack
From Factormini-ITX
DisplayN/A
ODDSlim(Slot Load) optical drive bay
HDD1 x 2.5"/3.5" HDD Drive bay
Cooling50mm fan(included)
Power SupplyNO Internal PSU board!!! Suitable 12V PSU internal board can be bought separately.
PackingN.W.: 1.99KG  G.W.: 2.15KG 
Each packed in neutral box (320*280*140mm)
Radiator Height
below 20mm when 3.5 inch HDD used
below 35mm when 2.5 inch HDD used
AC/DC Brick AdapterNO AC-DC brick adapter!!! Suitable 12V brick adapter can be bought separately.
Rear I/O Panel2 x COM Port, 2 x WIFI, External  SATA connector with power
Front  PanelUSB2.0 x 2 (USB 3.0 optionaly), MIC, audio out, IR round window for remote controller internal module







































More details  about HT80 coming soon.....



Tomas




Friday, 18 January 2013

Jonsbo S1 HTPC case

 
Jonsbo S1 HTPC Case
 
Today we've received the long-awaited Home Theatre PC Case, Jonsbo S1 model.
This product is manufactured by a little-known Chinese company 
“JONSBO”, specializing in the production of HTPC cases.
It is so interesting design that has a volume knob – gadget quite unusual in computer cases. The installation of this thing is simple - the USB plug need to be plugged into the USB motherboard
 's onboard port , every computer familiar DIY person will deal with it with no doubt. The volume knob does not require any driver installation, is automatically detected by the operating system, and works even on Linux (tested on Ubuntu 12.04).
Turning the knob causes the lowering or raising of the Master volume in your OS. Another thing that immediately strikes the eye is the high quality housing. Front panel is made of thick aluminum finished with a wiredrawing technology which give a beautiful texture. I have to admit that it looks very aesthetically pleasing. I personally do not like "overdone" cases, and this chassis captivates its simplicity. Besides the two chrome button "Power", "Reset", "Eject" and a small window Infrared (Yes! The case has a internal IR module with a stylish black remote controller) you will not find there more "additions". On the sides of case, useful add-ons can be found, such as:

  • 1 x USB 2.0 % 1 x USB 3.0
  • Audio jacks
  • Cooling fans speed control switch



While the first two options are the standard when it comes to PC case, the third option “Fan speed control switch” is not encountered very often, and I have to admit that it is very useful, especially when you want  your computer to be “silent”.

The rest of the case is made of high quality galvanized steel. Inside of the chassis looks very practical, it has one optical drive bay (for DVD or Bluray), and three 3.5-inch hard drive bays. Mounting holes has rubber disks for the screws to prevent vibrations.




The total height of the housing is 96mm, and here there is a problem, because the body does not accept the coolers with a height greater than 75mm. There is some inconvenience, 
It can be solved by purchasing inexpensive but perfect for this case cooler - PCCooler S85, with PWM control. It is especially designed for this kind of low profile HTPC computers, and has a height of 27mm only! I must say that it works perfectly with Intel i7 3770 CPU installed on this case.
Jonsbo S1 also has four Low Profile "Half-size" PCI slots.
It was hard to find a powerful graphics card with metal low profile bracket, in the end I bought a XFX Geforce GT630 on ebay for a reasonable price, metal LP bracket bought separately on Ebay as well.




Let's back to the multimedia remote controller attached to the package, it's made very nicely, it is quite easy in install (via USB onboard port) and use, fully compatible with MCE and XBMC multimedia players.
The only thing I missed was "air mouse" function, which give possibility to control the mouse cursor with the remote control.
For it has the ability to remotely turn on and off the computer which "lazy" users will definitely like ... ;-).






I've assembled this computer for one of our clients, an he's  truly  amazed ...
Case  looks and works just great, I think it's a perfect choice for someone who want to build his own Home Theatre PC without spending a lot of money....

Just below  there are  specification of the case:

Model:S1(Black)
Dimension:440 mm(W) x 96 mm(H) x 355 mm(D)
Panel Material:5.0mm Aluminum
Structure Material:0.8mm SECC+SGCC Steel
Form Factor:Micro ATX
Power Supply:PSII
Drive Bay:1 x 5.25" / 3 x 3.5" or  2 x 3.5" HDD + 1 x 2.5" HDD
Front I/O Port:USB 3.0 x 1, USB 2.0 x 1, Audio, MIC
Expansion Slot:4
Cooling Fan Space:3 x 80mm (built-in)
Packing Size:455mm x 190mm x 530mm
NET/Gross Weight:4.6KG / 5.6KG
Features : Switch for adjusting fans speed, Knob for adjusting volume 



Hope you've enjoyed my review.


Best Wishes

Tomas

IT-Tech, HTPC Specialists